Getting to know SATA

Getting to know SATA – For example, if you want to buy new storage, you should at least know what SATA is.

The reason is that most of today’s storage already carries SATA. And this SATA has three versions with different specifications.

Well, here I will explain in detail.

What is SATA?

SATA ( Serial Advanced Technology Attachment ) is the interface between SSD and hard disk. This type is the result of the development of IDE and ATA, both in terms of form and speed.

Simply put, the form of SATA is much slimmer than the two types of storage. In terms of speed, the SATA interface has a minimum transfer rate of 150 Mb/s, while the ATA is only 100 Mb/s.

In addition, the SATA interface is very easy to install and compatible with all laptops or PCs today.

SATA Version

SATA has its own version. Knowing this type can be useful so that you get maximum performance when choosing a storage device.

Here’s the explanation:

1. SATA 1

SATA 1 is the first generation version.

This version is often known as SATA 1.5 Gb/s. The reason is that interface version 1 is capable of running up to a speed of 1.5 Gb / s.

For throughput bandwidth, SATA 1 has performance up to 150 Mb/s.

Note: Throughput bandwidth is the actual speed at a time. While the interface is the maximum speed limit that you can get.

2. SATA 2

SATA has been developed again to version 2. SATA 2 has an interface speed that is twice as superior as before, which is up to 3 Gb / s.

Throughput bandwidth on SATA 2, has a performance of up to 300 Mb/s. This version is still recommended for use by today’s PC or laptop users.

3. SATA 3

SATA 3 has an interface speed of up to 6 Gb/s.

Meanwhile, the throughput bandwidth has a performance of up to 600 Mb/s. You could say it’s quite high, especially for gaming or editing purposes.

Oh yes, there is no difference for the SATA version port on the computer.

For example, if you use a SATA 3.0 SSD connected to port 2.0, it can still be connected. It’s just that the speed is reduced.

Difference between IDE and SATA

IDE is actually still the same type as ATA (just a term). Well, if you want to know what the difference is with SATA, it’s actually in the interface.

SATA cables are smaller, while IDE cables and interfaces are wider.

Other differences can be checked in the following table:

IDEA	SATA
Compatible for use on old PCs	Suitable for use on the latest PCs
Installation must be accompanied by jumper settings	Installation of the SATA type is easier because all you have to do is connect the cable
Greater electricity consumption	Less electricity consumption
This type of IDE takes up a lot of space, because of its larger size	Relatively smaller size, so it doesn’t take up much space
IDE cable is up to 18 inches	SATA cables up to 39 inches
The price of IDE cable is more expensive and it’s getting hard to find on the market	SATA cable prices are cheaper and easy to find
Used in older operating systems, such as Windows Vista and XP	Almost can be used on all operating systems (old and new)

The type of SATA that I describe, applies to storage and ports on the motherboard.

For example, if you want to use new storage (hard disk or SSD), make sure the version is right. For example, if the motherboard supports SATA 3, it’s better to buy storage that has SATA 3 as well.

This is so that the speed obtained can be maximized.